Particle.news

FAA Nears Explanation After Router Cascade Halted 18,000 Flights

Investigators will report findings that could decide whether contractor installation or router configuration failures justify a roughly $50 billion modernization push.

Overview

  • A cascading failure in the FAA’s telecommunications network prompted a nationwide ground stop on Friday, Nov. 13, that lasted nearly five hours and disrupted more than 18,000 flights and about one million passengers.
  • Federal probes traced abnormal activity to newly installed Juniper routers at sites including El Dorado, Arkansas and a replacement in Amarillo, Texas and testing is under way at an L3Harris lab in Florida with FAA, Cisco and FBI participation.
  • The FAA temporarily paused further Juniper router installations and disabled some router broadcast functions while investigators seek to determine whether the cause was defective hardware, improper configuration, or an installation error.
  • The Air Traffic Control System Command Center in Warrenton ordered the nationwide ground stop after multiple centers lost communications, investigators found the network was swamped by roughly 1,000 connection attempts every four to five seconds which disrupted communications at 17 of 22 regional centers.
  • The incident has heightened scrutiny of L3Harris oversight and FAA monitoring, sharpened congressional demands for independent review, and put Transportation Secretary Sean Duffy’s roughly $50 billion funding request under close debate as officials prepare public briefings and hearings.