Particle.news

Delhi Pollution Readings Drop High Values From Official Dataset

Gaps caused by monitoring limits likely understate Diwali peak exposure and have prompted calls for reconciled data, audits, and clearer public reporting.

Overview

  • The monitoring gaps that appeared on the night of Nov. 8–9 removed extreme PM2.5 observations from the national database when pollution peaked during Diwali, leaving many station‑hours blank during the worst hours.
  • The Central Pollution Control Board says its instruments are not calibrated above about 1,000 µg/m³ for PM2.5 and that values beyond that design range can appear as missing under its current processing rules, which require a minimum number of valid hourly readings to compute a daily average.
  • Delhi Pollution Control Committee station logs show raw hourly values that reporters say exceeded 2,000–3,000 µg/m³ during the peak; those raw values did not enter the CPCB aggregates and have not been independently validated in the coverage.
  • An independent estimate from the Centre for Research on Energy and Clean Air found that substituting a conservative 1,000 µg/m³ for 255 missing station‑hours would raise the reported Diwali 24‑hour PM2.5 average from 269 µg/m³ to roughly 400 µg/m³, about a 49% increase.
  • Official 24‑hour averages eased to an AQI of 290 at 4 pm on Nov. 15 and to a city real‑time AQI of about 216 on the morning of Nov. 16, but forecasts from AQEWS and meteorologists predict deterioration from Nov. 17 and experts are urging CPCB and DPCC to publish raw exceedances, station uptime, and to commission independent audits to protect public health and restore trust.